PureSec 2018 Glycerin／Liquid Filled RO Water Pressure Gauge/Meter with bracket /0-150psi)

PureSec 2018 Glycerin／Liquid Filled RO Water Pressure Gauge/Meter with bracket (0-1kg(MPa)/0-150psi)

מדורג ע״י יותר מ- 2 צרכנים, יותר מ- 99% מהביקורות על PureSec 2018 היו בעלות סנטימנט חיובי, כלומר הצרכנים שקנו את המוצר ימליצו עליו בסבירות גבוהה כאשר יתבקשו לציין מדדי לחץ הידראוליים מומלצות.

"Compared to an air filled gauge, It will be much quieter as water has a tendency to vibrate when running, as well as lasting much longer as the oil in the gauge will soak up the vibrations which can cause excessive wear on air filled gauges.

Sufficient PSI is very important for the correct operation of a reverse osmosis unit. Low water pressure is a leading cause of poor RO system performance. A pressure gauge assures that proper pressure is being supplied. It will also make pressure drops apparent which can tell you that sediment and carbon blocks need to be changed.

Glycerin filled pressure gauges absorb vibration and pressure spikes increasing service life. This glycerin filled pressure gauge comes with 1/4" quick connect fittings for quick easy installation in-line before the RO Membrane.

" Notes regarding glycerin-filled meters

There is an air bubble in the glycerin that you can see, and it is there by design. If there is no bubble, the meter is faulty. There is no need to cut the rubber plug on the top of the meter as that will open the meter to possible infiltration of particulate contaminants and moisture, as well as allow the glycerin to leak out

How to use it?

Assemble the gauge as photo show, then pop in your 1/4" tubing into each end of the Tee , and finally keep the gauge standing up right with teflon tape or zip ties. To remove, just push in the outer circle on each end and pull right out. You need to make sure the tubing is cut squared to insure no leaks.Be sure you tighten the plastic fitting connected to the gauge by an adjustable wrench

What you will receive?

Gauge x1

1/4" NPT to 1/4" push-to-connect adapter x 1

"C" clips

מאפיינים: ( תרגום אוטומטי עבור למקור )

• 100% Accurate, 100% Lead free, 100% Readable
• Material High quality all stainless steel, solid construction 2 amp 5 8 in diameter about 0.4lb Working temperature 25 50
• Comes with 1 4 push to connect fittings a tee and 1 4 NPT to 1 4 push to connect adapter
• Shock resistance,quite, easy to read and assembly
• Designed for use with saltwater aquarium line of RO systems or other RODI system

• מספר יצרן: JMC-PGWB .

• מותג : PureSec
• מספר קטלוגי : JMC-PGW/B
• מידה : 0-1kg(MPa)/0-150psi